 |
|
|
  |
LK302VE Flex 7" Heavy Duty Polishing Machine
with Speed Control |
| |
|
 |
Hawk Severe Duty Floor Machines 17" & 20" |
| |
|
 |
Mira Clean #1 Concentrated Daily Cleaner
Regular Cleaning for All Surfaces Including:
Marble, Granite, Terrazzo, Limestone, Ceramic
Tile, Quarry Tile, Masonry Surfaces, All Grout
Mira Clean #1 is a concentrated cleaner designed
for all surfaces. Strong enough for the
professional, yet gentle enough for the
do-it-yourself specialist. Mira Clean #1 is a
nontoxic cleaner that can handle the most
difficult stains, yet is gentle enoguh for
everyday use.
Item# MBSMC1GA - Sold in Gallons |
| |
|
 |
Mira Strip Fast-Acting Stripper - SOLVENT
BASE COATING AND/OR WAX REMOVER FOR:
Polished & Textured Marble Ceramic &
Porcelain Tile Polished & Textured Granite
Polished & Textured Natural & Cast Stone
Mira Strip is a fast acting stripper designed to
remove traditional solvent base coatings and
waxes for preparation of one of our penetrating
sealers and/or color enhancing products. Mira
Strip is recommended for removing Mira Matte
color enhancer when necessary and may be
effective as a cleaner for removing some food
greases, tar and other hard to remove stains
from porous materials. SPECIAL FEATURES:
Fast-Acting Easy-to-Use Coverage: 200 - 300
square feet per gallon
Item# MBSMSGA - Sold in Gallons |
| |
|
 |
Mira Soap Specialty No-Rinse Maintenance
Cleaner MAINTENANCE CLEANER FOR:
Honed & Textured Limestone Honed Terrazzo
Honed & Textured Marble Mira Soap is a specially
formulated no rinse stone soap designed for easy
ongoing maintenance of honed, tumbled, textured
limestone, marble, travertine, terrazzo and
other stone containing calcium. Mira Soap
produces a protective film that protects the
surface of the stone. Mira Soap only reacts with
the calcium in the stone so there is no risk of
buildup like a traditional floor coating.
Non-textured surfaces can be buffed with a floor
machine and white nylon pad for added patina or
shine. SPECIAL FEATURES: Biodegradable
Nonflammable No Rinse Easy to Use Coverage:
1,000 - 7,000 square feet per gallon
Item# MBSMSOAPGA - Sold in Gallons |
| |
|
 |
Lithofin MN Builder's Clean
Cleans granite, gneiss, quartzite and other
natural and artificial stones. Removes cement
film, encrusted dirt residues, blooms, rust and
rust discolorations. Also acts to prevent rust
in hard stones containing iron. Not suitable for
polished marble, limestone etc. Concentrate
very strong contains acid minimal odour
Coverage: approx. 30-50mฒ/L
Item# VICLCFR1L - Sold in 1 Liters |
| |
|
 |
Lithofin FZ Intensive Cleaner
For occasional thorough cleaning or for regular
cleaning of floors subjected to heavy wear.
Removes stubborn dirt, oil and grease. Suitable
for all ceramic finishes. Concentrate extra
strong alkaline solvent-free Coverage:
10-15mฒ/L as thorough base cleaner, up to 100mฒ
for diluted application.
Item# VICLCIC1L - Sold in 1 Liters |
| |
|
 |
Lithofin EASY-CARE
For maintenance of all flooring surfaces
Universally usable for cleaning all
water-resistant interior surfaces, such as all
ceramic tiles, clinker, brick and clay slabs,
all types of stone, plastics, lacquered surfaces
etc. For gentle cleaning and maintenance.
Colours will become stronger with regular use,
making floors more attractive. Concentrate
high yield does not form layers Coverage: Use
one squirt (ca. 20 ml) per 10 L bucket of water.
Item# VICLDCC10L - Sold in 10 Liters |
| |
|
 |
Lithofin WAX-OFF
Removes layers of wax, sealants, tar, oil
stains, lacquer and glue. Soiling is dissolved
and can then be washed off with water.
Ready-to-use deep-acting contains solvents
Coverage: ca.7-15mฒ/L
Item# VICLGWR1L - Sold in 1 Liters |
| |
|
 |
Lithofin MN Power-Clean
For thorough cleaning of used floors in case of
severe general soiling, greasy dirt, residues of
floor care materials, gloss-films etc. For final
cleaning of new surfaces at building sites. This
product is recommended for all types of natural
stone, but especially for polished marble and
limestone. Concentrate highly effective
acid-free, mildly alkaline no solvents and no
smell Coverage: approx. 10-30mฒ/L
Item# VICLSCS1L - Sold in 1 Liters |
| |
|
 |
511 Impregnator
Water, Stain, & Slip Protection For: Sanded
Grout, Quarry Tile, Ceramic Tile, Glazed Tile,
Porcelain Tile, Polished Granite, Polished
Marble, Terrazzo, oncrete, Brick, Stucco, Slate,
Quartz, Travertine, Agglomerate 511 Impregnator
is the original penetrating sealer designed for
the protection of all medium to dense porous
surfaces. 511 Impregnator forms an invisible
barrier that is resistant to moisture and stains
while allowing vapor to escape. 511 Impregnator
is not a surface coating and will not alter the
natural look. All surfaces treated are harder
and less slippery. Special Features: - Interior
& Exterior Use | - Weather Resistant | - Less
Expensive - OK for Food Areas | - Superior
Coverage | - Easy-to-Use - U.V. Transparent
Coverage: 250 - 1,000 square feet per quart 511
Impregnator is V.O.C. Compliant where applicable
Item# MBSIQT - Sold in Quarts |
| |
|
 |
511 Seal & Enhance
One-Step Sealer & Enhancer Ready to Use Solvent
Base Impregnator/Color Enhancer For: Granite
Limestone Not for Concrete/Masonry Marble
Ceramic Tile Polished Stone Natural Stone
Quarry Tile Slate Grout 511 Seal & Enhance
Is a unique, solvent-base formula designed to
eliminate the need to use an impregnator before
using a color enhancer for maximum stain
protection and superior color enhancement. 511
Seal & Enhance is safe for use on granite,
marble, limestone, natural stone, slate, ceramic
tile, quarry tile, grout, concrete and masonry
surfaces. 511 Seal & Enhance will enhance the
color and rejuvenate the appearance of tumbled,
honed, acid-washed, sandblasted, flamed,
textured, even polished stone and tile surfaces.
In addition, 511 Seal & Enhance revitalizes old
and worn stone and tile installations. It can be
used successfully in both interior and exterior
environments and is freeze/thaw resistant.
SPECIAL FEATURES: Superior Stain
Protection Interior/Exterior One Step Oil
Resistant Water Repellant Will Not Yellow
Enhances Color Grout Release Easy To Use
VOC Compliant Lasts 3 - 5 Years Good for
Floors Coverage: Approximately 250 - 4,000
square feet per gallon 511 Seal & Enhance meets
V.O.C. requirements.
Item# MBSSEGA - Sold in Gallons |
| |
|
 |
511 Porous Plus
The Best Performing Penetrating Sealer WATER,
STAIN & SLIP PROTECTION FOR: Sanded Grout
Terra Cotta Cantera/Adoquin Brick
Limestone Sandstone Cement Slate
Saltillo Tile Flagstone Concrete Tile
Pre-Cast Concrete Flamed & Honed Granite
Honed/Textured Marble Polished Marble
Polished Granite 511 Porous Plus is a
penetrating sealer designed for the protection
of the most porous surfaces. 511 Porous Plus
forms an invisible barrier that is resistant to
moisture and stains while allowing vapor to
escape. 511 Porous Plus is not a surface coating
and will not alter the natural look. All
surfaces are harder and less slippery.
INDEPENDENT TESTS SHOW 511 POROUS PLUS OUT
PERFORMS COMPETITIVE PRODUCTS. (Test results are
available upon request).
SPECIAL FEATURES: Interior &
Exterior Use Weather Resistant OK for Food
Areas Superior Coverage Easy to Use U.V.
Transparent Coverage: 500 - 2,000 square feet
per gallon or 2,000 - 4,000 square feet per
gallon on polished surfaces. 511 Porous Plus is
V.O.C. Compliant where applicable.
Item# MBSPPQT - Sold in Quarts |
| |
|
 |
Lithofin MN Care-Seal
Shiny protective film, which strengthens colour
and gloss. For initial treatment of new rough
surfaces, and for occasional care of worn
surfaces which have become matt. Concentrate
for indoor use only contains no solvents,
water-based Coverage: approx. 20mฒ/L undiluted,
up to 200mฒ for diluted application
Item# VICLAPP5L - Sold in 5 Liters |
| |
|
 |
Lithofin Multi Seal - 12 x 1L Case
Surface sealer renders rough limestone,
sandstone and terracotta resistant to staining,
water and dirt. Gives a low sheen and makes the
surface smoother and, therefore, easier to
clean. A special product from the LITHOFIN
range. It is a ready to use emulsion that
produces an abrasive resistant, water resistant
protective film with satin finish. This reduces
the superficial marking scuffing incidence in
order to maintain the floor with ease. The
surface will retain its natural light colour,
will be resistant to oil, grease, water etc. and
is easy and safe to use. Application: for many
types of rough and honed finished limestone and
similar natural stone, concrete moulded slabs,
terracotta flooring of hand made and semi hand
made types like Mexican, Italian, Spanish etc.
Only for use internally on preimpregnated
surfaces. Coverage: approximately 7 - 12 m/litre,
on impregnated surfaces.
Item# VICLSSA1L - Sold in 1 Liters |
| |
|
 |
Lithofin MN Stain-Stop
This special impregnation optimally protects
absorbent, stain-sensitive natural and
artificial stone surfaces against staining.
Largely prevents penetration of oil, grease and
water and makes further maintenance easier.
Highly recommended in kitchen and bathroom. No
health concerns once dry, according to FMPA
report. Also for polished surfaces ready for
use for indoor and outdoor use no gloss
effective for many years contains solvents
Coverage: approx. 7-15mฒ/L
Item# VICLPSI1L - Sold in 1 Liters |
| |
|
 |
Lithofin Anti-Slip
Reliable slip resistance on slippery and wet
floors, in shower recesses and bathtubs.
Microscopic changes in the surface structure
produce significantly increased slip resistance
with a long term effect. Set for 6mฒ of safety
suitable for indoor and outdoor use
Item# VICSMFSGA - Sold in Gallons |
| |
|
 |
Marble Conditioner Marble & Terrazzo Color &
Gloss Enhancer
COLOR & GLOSS ENHANCEMENT FOR: Marble
Terrazzo Agglomerates Travertine Marble
Conditioner is a recrystallization treatment
designed to maintain the polish of marble,
terrazzo and agglomerate surfaces. A floor or
hand buffer is necessary for this procedure. We
recommend using a Marble Master MM 1000 (150 lbs
& 175 rpm) floor machine or hand machine with
the appropriate steel wool pads.
SPECIAL FEATURES: Easy to Use Improves
Slip Resistance Makes Surface Harder Cost
Effective Enhances the Color Enhances the
Polish Removes Light Scratches Removes Etch
Marks Coverage: 1,000 - 5,000 square feet per
gallon
Item# MBSMCGA - Sold in Gallons |
| |
|
 |
Mira Matte - Natural Stone Color Enhancer
Color Enhancement For Textured Stone Surfaces
Including: Flamed Granite, Cleft Faced Slate,
Flamed Limestone, Tumbled Marble, Textured Cast
Stone, Textured Natural Stone Mira Matte is a
unique product designed to enhance the natural
color of all flamed, sandblasted, split faced,
tumbled, and textured surfaces. When used with
one of our penetrating sealers, Mira Matte seals
and protects while leaving a beautiful, low
maintenance, color enhanced satin sheen. Mira
Matte allows vapor to escape while offering a
scuff and weather resistant surface. Mira Matte
is U.V. transparent, will not yellow and can be
used on both interior and exterior applications.
Special Features: - Interior & Exterior | -
Easy-to-Use | - U.V. Transparent | -
Non-Yellowing | - Weather Resistant _ - Superior
Coverage
Item# MBSMMGA / MBSMMQT - Sold in Gallons /
Quarts |
| |
|
 |
Mira Shine Medium to High Gloss Interior
Surface Sealer For: Saltillo Tile Brick
Terra Cotta Tile Slate Unglazed Ceramic
Tile Concrete & Grout Mira Shine is formulated
for interior use as a high gloss surface sealer.
The combination of Mira Shine with the
appropriate Miracle Sealants penetrating sealer
provides durable protection.
SPECIAL FEATURES: Interior Use Floors
only Scuff Resistant VOC Compliant Water
Based Formula Coverage: 400 - 2000 square feet
per gallon. (37 - 180 square meters per 3.785
liters).
Item# MBSMSHGA - Sold in Gallons |
| |
|
 |
Stone Polish Natural Stone Polish
For: Counter Tops Fireplaces Vanities
Walls Stone Polish nourishes and enriches the
natural beauty and polish of marble, granite,
agglomerate, terrazzo and stone counter tops,
vanities, fireplaces and walls. Stone Polish is
not recommended for floors. Stone Polish is easy
to use, with no machinery necessary for removal.
Not for floors.
SPECIAL FEATURES: Easy to Use High Shine
Not for Floors Inexpensive Coverage: Up to
3,000 square feet per gallon (270 square meters
per 3.785 liters).
Item# MBSSPQT - Sold in Quarts |
| |
|
 |
Stone Medicฎ MPC Marble Polishing Compound
Marble Polishing Compound is a ready to use
polishing paste for restoring or polishing worn
marble, travertine, limestone and agglomerates.
Use with a floor machine or on radial arm
polishers. Use with Stone Medicฎ red floor pads,
felt pads or a fiber buffing head.
Item# VICSMMPC10# - Sold in 10lb Containers |
| |
|
 |
Lithofin MN Polish Cream
Protects and maintains all polished stone
surfaces. Makes water-repellent and produces
excellent gloss. Ideal for the care of kitchen
work tops, vanity tops, tables and similar small
surfaces. Presents no health concerns once dry,
according to FMPA report Easy to polish
contains no solvent, water-based Coverage:
approx. 4mฒ/100ml
Item# VICLSPC.5L - Sold in 5 Liters |
| |
|
 |
Ceramic Tile Pre Polish
Ceramic Tile Pre Polish is a ready-to-use
product which is the first part of a two step
ceramic tile enhancement program. Ceramic Tile
Pre Polish will clean and prepare the tile as
well as thoroughly clean the grout. Ceramic Tile
Enhancer, the second step in the process, will
then add a natural glossy shine to most unglazed
ceramic, porcelain, and quarry tile floors. User
Benefits Thoroughly cleans grout Easy to use
No special training required Odorless
Lowers maintenance cost while improving
appearance Performance Features Coverage: 80
to 100 sq. ft. per lb.
Item# VICTMCTPP10# - Sold in 10lb Containers |
| |
|
 |
Ceramic Tile Enhancer
The TileMedicฎ Ceramic Tile Enhancer is a
ready-to-use product which is the second part of
a two step ceramic enhancement program. Ceramic
Tile Enhancer will add a natural glossy shine to
most unglazed ceramic, porcelain, and quarry
tile floors. User Benefits Easy to use No
special training required Lowers maintenance
cost while improving appearance Can be used
with weighted pad driver Performance Features
Odorless Imparts a long lasting gloss to
unglazed ceramics, porcelains, and quarry tiles.
Eliminates need for floor finish Coverage: 80
to 100 sq. ft. per lb.
Item# VICTMCTE10# - Sold in 10lb Container |
| |
|
 |
Lithofin MN Colour Intensifier
Improves the appearance of rough, absorbent
natural and artificial stone surfaces.
Invigorates the colours and accentuates the
structure, makes water and dirt repellent.
Ready for use for indoor and outdoor use no
gloss contains solvents can be applied in
several coats ideal for concrete slabs
Coverage: approx. 7-15mฒ/L
Item# VICLSIM1L - Sold in 1 Liters |
| |
|
 |
TileMedicฎ Ceramic Tile Prepolish Brush for
Mighty Max Floor Machine
TileMedicฎ Ceramic Tile Prepolish Brush is
specially designed to enhance the performance of
the TileMedicTM Ceramic Tile Pre-polish. Its pad
pre-conditions the tile surface, while its
bristles thoroughly clean the grout lines. This
brush should not be used with TileMedicTM
Ceramic Tile Enhancer; the final step is the
polishing process.
Item# VICTMCTPPB - Sold as eaches |
| |
|
 |
Boss Hawgฎ-Wet Strip/Dry Strip Floor Pad
Boss Hawgฎ is the super stripping pad for
completing your natural fiber system of floor
maintenance. This pad has the abrasive character
to dry strip a floor, or work equally well when
you wet strip. Boss Hawgฎ was designed to work
quickly and thoroughly, whichever system (wet or
dry) you use.
Item# P 8HSGEA - Sold as eaches |
| |
|
| |
|
|
|
|
Marble & Stone